Applications

HOME > Applications > Internal Coatings & Linings > Epoxy Flow Efficiency Coatings (O&G ) > Powercrete R-60 (Bur) -High Build Epoxy for MOT140°F (60°C)

Powercrete R-60 (Bur) -High Build Epoxy for MOT140°F (60°C)

Powercrete R-60 (Bur) -High Build Epoxy for MOT140°F (60°C)
Colors: Burgundy
Total Thickness: 30 mils
Category: Epoxy Coatings
Powercrete R-60 is a medium temperature, high-build liquid epoxy coating designed specifically for corrosion protection of buried pipelines coated with Fusion Bonded Epoxy and operating at temperatures up to 140°F (60°C).  R-60 is ideally suited for the corrosion protection of girth weld areas on FBE coated pipes, also for valves, fittings, bends and for rehabilitation of pipelines.  R-60 is a 2-component, solvent-free epoxy can easily achieve a final dry film thickness of up to 30+ mils (~ 750 microns) in a single coat, without drips or sags. R-60 combines the adhesion, toughness and anti-corrosion properties of epoxy with an ease of application.
FOR PRODUCT LITERATURE GO TO WWW.SEALFORLIFE.COM- SECTION POWERCRETE

Applications:

  • Pipe Bends, Fittings, Valves & Odd Shapes
  • Pipeline Repair & Rehabilitation
  • Girth Welds / Field Joints
  • Directional Drilling
  • Water Pipe OD
  • Any bare steel structure in need of protection

Features & Benefits:

100% Solids Epoxy  Same Formula can be Hand or Spray Applied
    No V.O.C.s and no isocyanates
    Flexibility in difficult to coat field conditions
Excellent Mechanical Properties High build in a Single Application
    Can be used in direction drill and thrust bore     applications     Cost saving formulation can build 30 mils in one pass
Excellent Resistance to Water Immersion Excellent Wetting Properties to Bare Steel

    Can be burried within close contact of seawater     and ground waters over a broad pH range

    Exceptional adhesion, cathodic disbondment and soil     stress resitance on bare steel

Max Temperature: 60 ºC, 140 ºF

Related Documents: