Applications:
Used to protect buried Pipelines and Above- or Below-Ground Storage Tanks, AnodeFlex 3100 can be placed remote to the target structure where protection of upto 328mA/m (100mA/ft) is designed. AnodeFlex 3100 achieves the optimum current output in applications where close proximity anode groundbeds do not work.
AnodeFlex 3100 can be placed remote to the steel surface to be protected, thereby maintaining the steel-to soil “instant –off” potential in the required window of -850 mV (-950 mV if SRB’s present) and -1200mV. The central MMO wire and cable are surrounded by factory prepackaged, high conductivity coke breeze, held in place by a porous, woven acid-resistant jacket. This arrangement avoids handling loose coke breeze and simplifies field installation. The patented use of acid resistent jacket maintains longterm integrity of the anode's coke breeze. The improved current distribution increases anode efficiency and maintains a low resistance groundbed. On poorly coated pipelines where optimal polarization can no longer be achieved, AnodeFlex 3020 can often be installed as an alternative to expensive recoating. Both on single and multi-parallel pipelines, safe levels of polarization will be restored at every point. The system avaoids difficult and costly field recoating and greatly reduces environmental disturbance.
AnodeFlex 3100 is delivered on long length spools and the installation is as simple as laying a low voltage power cable.
Also See: AnodeFlex 3000 Accessories: Proven heat-shrinkable splice kits, with tee splices and end sealing caps are available to complete any installation design.